9m 992 Carrera/S/GTS/Turbo/GT3 PDK2 software tuning

9m 992 Carrera/S/GTS/Turbo/GT3 PDK2 software tuning
 
Increased Rev Limiter
 
Increased torque Limitations
 
Quicker Shifts – Especially towards rev limiter
 
Higher clutch clamping force
 
 
 
 
TO NOTE:
 
TCU must be sent to Ninemeister for software calibration turnaround time is 5-7 days.
 
 Ninemeister Limited
 Unit 12 Chesford grange
 Warrington
 Cheshire
 WA1 4RE
 UK
 
When the PDK2 module is removed from your car DO NOT START YOUR VEHICLE OR KEY-ON. You will need to make sure your car is parked and in a position where you don’t need to move it until you’ve reinstalled it.
 
Disclaimer: You accept responsibility and risks of any tunes and added features by Ninemeister. If you are not the end user of the car, you will be solely responsible for notifying the customer they also accept the responsibility and risks of these and Ninemeister is not liable. Ninemeister is also not liable for voided warranties due to installation of our product.
 
REMOVAL AND REPLACEMENT
 
 Tools required 
 
  Ratchet
 
   T25 Torx Bit
   16mm socket
 
   First of all remove the power from the battery
   Fold the front seats forward to gain better access to the rear.
   Remove the rear lumbar pad supports they are velcroed in.
   Remove the seat belt plastic covers take your time as these can break easily.
   Use the 16mm socket to remove the seat belt buckle and simply unplug.
   Lift out the rear seat section and access PDK2 unit under floor carpet rear deck and unplug.